-
25 pcs 15AK TIP -
JASIC MIG200 N2S32 -
JASIC MIG160 NSS12 -
JASIC MIG160 PFC N2S22 -
JASIC MIG200 PFC N2S62 -
JASIC MIG250 N2S82 -
JASIC MIG250 PFC N2SA2 -
JASIC MIG200 PFC NZS52 -
JASIC MIG250 PFC N2SB2 -
JASIC MIG200 PFC LCD N2S53 -
JASIC MIG160 MIG200 -
JASIC MIG160 N241 MIG180 N240 -
JASIC MIG160 N219 MIG200 N220 -
JASIC MIG200 PFC N297 -
JASIC MIG250 NZ239 -
JASIC MIG250 N289 -
JASIC MIG200 N214 MIG250 N218 -
JASIC MIG200 N269 MIG250 N269 -
JASIC MIG250 N270 MIG350 N271
-
JASIC MIG250F N253 MIG315F N254 -
JASIC MIG350 N216 MIG500 N308 -
JASIC MIG350 N222 MIG500 N221 -
JASIC MIG400 N361
-
JASIC MIG350 N397 MIG400 N396 -
JASIC MIG350P N316 MIG400P N317
-
JASIC MIG500 N398
-
NB-250 N214Ⅱ -
NB-200 N245 -
NB-270 N248II -
NB-270 N248 -
NB-300 N218 -
NB-270F N253Ⅱ -
NB-315F N254Ⅱ -
NB-250D N247Ⅱ -
NB-250DF N242Ⅱ -
NBM-270 N249 -
NBC-350 N216Ⅱ -
NBC-500 N215Ⅱ
-
NBM-350 N367 -
NBM-500 N368
-
WSME-315 E203Ⅱ -
WSE-315 E202Ⅱ
-
WSME-200 E201Ⅱ -
WSME-500 E312 -
TIG200S W221Ⅱ -
TIG200 W223Ⅱ -
TIG250S W228Ⅱ -
TIG250 W227Ⅱ -
TIG300S W230Ⅱ -
TIG300P W232Ⅱ
Vertical Line Auto Weld Machine Swing-type Welding Tractor
HK-100K Vertical Line Auto Weld Machine Swing-type Welding Tractor
HK-100K tractor is automatic device. It can get wider welding seam after a time welding.You can adjust swing speed, swing angle, off-set position of centre and stopping time of left and right. It is suitable for various beads. The biggest speed is 1250mm/min in weldless
HK-100K is made up of body, control case, X-Y slide blocks, blowtorch holder, guide wheel and straight track.
１）Body: It is the driving device, which includes motor, planet reducing box, driving gear and track wheel.
２）Control casing: To control the movement of carriage. Please refer to control panel manual.
３）Cross device: You can use it in the process of straight welding (such as container case) to adjust the position of torch in case of moving track.
４）X-Y trimming slide blocks: It is convenient to adjust the blowtorch up and down or left and right.
５）Swing device: To execute various welding model.
６）Holder of blowtorch: It can hold the blowtorch and adjust the angle of blowtorch easily. Notice: Must not hold the conductive section, which may lead to short out or electric shock.
７）Plug seat of source: It is the plug seat of external electric cable, which is connected with earth wire.
Main technical parameter
1.weight | 8.4Kg（including wig-wag） | ||
2.size | 430mm×280mm×290mm | ||
3.swinging motor | DC 24V | ||
4.Driving | Driving of chain gear | ||
5.walking speed | 50～1250mm/min | ||
6. range of blowtorch | Up and down | 40mm | |
Left and right | 120mm | ||
Job angle adjusting range | ±60° | ||
Running angle adjusting range | 10° | ||
7.functions | Walking direction | Fore and after | |
Swing speed | 0～100 | ||
Left-stop time and right-stop time | 0～2.5 s | ||
Swing angle | ±15° | ||
Off-set distance | 0～±8° | ||
8.swing model |
| ||
Welding technical parameters
welding wire diameter welding parameter | Φ1.2mm | Φ1.4mm | Φ1.6mm | |
current（A） | Down hand welding | 120-300 | 150-380 | 180-430 |
flush fillet welding | 120-280 | 150-320 | 180-380 | |
horizontal welding | 120-280 | 150-300 | 180-330 | |
voltage（U） |
| |||
distance between nozzle and workpiece（H） |
| |||
welding extension length（L） | The length is about 10 times welding wire diameter. It is L=10d | |||
List of package
Carefully take the machine out of its case.
The contents of the standard package are shown below. Check them carefully before assembling the machine.
1. | Host machine | 1set |
2. | Straight track（2m/pc） | 1pc |
3. | Standard power cord 220V/16M | 1pc |
4. | fuse 220V/2A | 2sets |
5. | Inner hexagon spanner | 1set |
6. | specification sheets | 1pc |
7. | Certificate of qualification | 1pc |
- User name Member Level Quantity Specification Purchase Date
- Satisfaction ：
-
