-
25 pcs 15AK TIP -
JASIC MIG200 N2S32 -
JASIC MIG160 NSS12 -
JASIC MIG160 PFC N2S22 -
JASIC MIG200 PFC N2S62 -
JASIC MIG250 N2S82 -
JASIC MIG250 PFC N2SA2 -
JASIC MIG200 PFC NZS52 -
JASIC MIG250 PFC N2SB2 -
JASIC MIG200 PFC LCD N2S53 -
JASIC MIG160 MIG200 -
JASIC MIG160 N241 MIG180 N240 -
JASIC MIG160 N219 MIG200 N220 -
JASIC MIG200 PFC N297 -
JASIC MIG250 NZ239 -
JASIC MIG250 N289 -
JASIC MIG200 N214 MIG250 N218 -
JASIC MIG200 N269 MIG250 N269 -
JASIC MIG250 N270 MIG350 N271
-
JASIC MIG250F N253 MIG315F N254 -
JASIC MIG350 N216 MIG500 N308 -
JASIC MIG350 N222 MIG500 N221 -
JASIC MIG400 N361
-
JASIC MIG350 N397 MIG400 N396 -
JASIC MIG350P N316 MIG400P N317
-
JASIC MIG500 N398
-
NB-250 N214Ⅱ -
NB-200 N245 -
NB-270 N248II -
NB-270 N248 -
NB-300 N218 -
NB-270F N253Ⅱ -
NB-315F N254Ⅱ -
NB-250D N247Ⅱ -
NB-250DF N242Ⅱ -
NBM-270 N249 -
NBC-350 N216Ⅱ -
NBC-500 N215Ⅱ
-
NBM-350 N367 -
NBM-500 N368
-
WSME-315 E203Ⅱ -
WSE-315 E202Ⅱ
-
WSME-200 E201Ⅱ -
WSME-500 E312 -
TIG200S W221Ⅱ -
TIG200 W223Ⅱ -
TIG250S W228Ⅱ -
TIG250 W227Ⅱ -
TIG300S W230Ⅱ -
TIG300P W232Ⅱ
Big hand manual pipe cutter picle cutting machine
CG2-11S Big hand manual pipe cutter picle cutting machine
“CG1-11S” big hand-operated pipe cutter is designed based on the investigation on local practical situation. It is an economic and practical big diameter cutter. It has four paralleled road wheels and locks machine with the chains rounded steel tube. Operate the machine by hand-operated mode. It is fit for the cutting of the big diameter no-seam steel tube above 250mm.The configuration of the machine is unique and it is easy to operate and maintain .It is convenient to move. The cutting assistant-time is short. It has high reliability and is fit for using in no-power field .There are three groups paralleled installation wheel in the base-plate .Transport the four paralleled road wheels to the ragged edge installation holes and install them when cutting full diameter steel tube. This installation can improve precision.
Specifications
1 Weight (body) | ：16.5 kg |
Accessory | ：2.5 kg |
2 Machine dimension | ：515×370×510mm |
3 Bevel form | ：I form or V form (The biggest angle is 45°) |
4 Resetting precision | ：1mm (The circumference of the tube is in 1000mm) |
5 Cutting steel tube diameter | ：250-1000mm (Collocated standard chain) |
6 Cutting pipe wall thickness | ：5-50㎜ (Standard torch collocation) |
Contents of package
1.Standard package | |
1）Body(Hand grips bilateral are installed in reverse) | 1set |
2）Standard torch and sections | 1set |
3）Chains(115knot) | 1pc |
4）Tip（G02 or G03） | 3pcs each |
5）Gas-in junction | 1set |
6）Torch linker | 1pc |
7) Specification sheets and certificate of qualification | 1pc each |
- User name Member Level Quantity Specification Purchase Date
- Satisfaction ：
-
