Lincoln Tweco Series American Style MIG MAG PTFE Graphite steel Liner Welding Liner Wire

Product parameters

Description

Lincoln Tweco Series American Style

Steel Applicable to welding wire outer diameter 0.6-0.8-0.9-1.0-1.2mm(.023"-.030"-.035"-.040"-.045")

Teflon---Blue Applicable to welding wire outer diameter 0.6-0.8-0.9-1.0mm(.023"-.030"-.035"-.040")

Teflon---Red Applicable to welding wire outer diameter 1.0-1.2mm(.040"-.045")

Teflon---Yellow Applicable to welding wire outer diameter 1.2-1.6mm(.045"-1/16")

Graphite OD:4.0 Applicable to welding wire outer diameter 0.6-0.8-0.9-1.0mm(.023"-.030"-.035"-.040")

Graphite OD:4.7 Applicable to welding wire outer diameter 1.0-1.2-1.6mm(.040"-.045"-1/16")

Teflon can be used continuously at a temperature of 260 ℃,
with the highest use temperature is 290-300 ℃,
extremely low friction coefficient,

Graphite wire feeding liner, has the very strong hardness and smoothness
Can reduce wire maximum likelihood in the transmission process of wear
Very suitable for aluminum wire and stainless steel wire welding requirements
extremely low friction coefficient,
good wear resistance and excellent chemical stability
Suitable for matching part Miller Tweco Lincoln MIG welding guns
Please check the wire feed wheel type of joint before purchasing,
please confirm with the MIG gun you can joint matching
Suitable for aluminum welding wire and flux cored wire

This liner fits the following Model lincoln welders:
SP-100, SP-100T, SP-125 Plus, SP-130T, SP-135 Plus, SP-135T, SP-170, SP-170T, SP-175 Plus, SP-175T, SP-180T,
MIG Pak 10, MIG Pak 15, MIG Pak 140, MIG Pak 180, Power MIG 140C, Power MIG 140T, Power MIG 180C, Power MIG 180T,
Pro 100, Pro 155, Pro-MIG 135, Pro-MIG 175, Pro-MIG 180, Weldmark 135 Plus, Weld-Pak 100, Weld-Pak 100HD, Weld-Pak 125,
Weld-Pak 125HD, Weld-Pak 140HD, Weld-Pak 155, Weld-PAK 175HD, Weld- Pak 180HD, Weld-Pak 3200HD, Weld-Pak 5000H

You will receive 10cm longer than the length you choose
In this way, you can install your welding torch and then cut to ensure
100% compliance with your welding torch length requirements