-
25 pcs 15AK TIP -
JASIC MIG200 N2S32 -
JASIC MIG160 NSS12 -
JASIC MIG160 PFC N2S22 -
JASIC MIG200 PFC N2S62 -
JASIC MIG250 N2S82 -
JASIC MIG250 PFC N2SA2 -
JASIC MIG200 PFC NZS52 -
JASIC MIG250 PFC N2SB2 -
JASIC MIG200 PFC LCD N2S53 -
JASIC MIG160 MIG200 -
JASIC MIG160 N241 MIG180 N240 -
JASIC MIG160 N219 MIG200 N220 -
JASIC MIG200 PFC N297 -
JASIC MIG250 NZ239 -
JASIC MIG250 N289 -
JASIC MIG200 N214 MIG250 N218 -
JASIC MIG200 N269 MIG250 N269 -
JASIC MIG250 N270 MIG350 N271
-
JASIC MIG250F N253 MIG315F N254 -
JASIC MIG350 N216 MIG500 N308 -
JASIC MIG350 N222 MIG500 N221 -
JASIC MIG400 N361
-
JASIC MIG350 N397 MIG400 N396 -
JASIC MIG350P N316 MIG400P N317
-
JASIC MIG500 N398
-
NB-250 N214Ⅱ -
NB-200 N245 -
NB-270 N248II -
NB-270 N248 -
NB-300 N218 -
NB-270F N253Ⅱ -
NB-315F N254Ⅱ -
NB-250D N247Ⅱ -
NB-250DF N242Ⅱ -
NBM-270 N249 -
NBC-350 N216Ⅱ -
NBC-500 N215Ⅱ
-
NBM-350 N367 -
NBM-500 N368
-
WSME-315 E203Ⅱ -
WSE-315 E202Ⅱ
-
WSME-200 E201Ⅱ -
WSME-500 E312 -
TIG200S W221Ⅱ -
TIG200 W223Ⅱ -
TIG250S W228Ⅱ -
TIG250 W227Ⅱ -
TIG300S W230Ⅱ -
TIG300P W232Ⅱ
Mini Compact Rail Welding Carriage
HK-20 Mini Compact Rail Welding Carriage
HK-20 carriage is multi-use automatic device, which is suitable for abutting joint, horizon welding, vertical welding and cross welding.The carriage adopts gear and gear rack driving mode. It can walk on rail which is parallel with work. The speed is smooth. The system adopts silicon control infinitively variable speeds to finish accurate welding. The biggest speed on “No-welding” state is 1300mm/min.
HK-20 is made up of body, control case, X-Y slide blocks, blowtorch holder, guide wheel and straight rail.
1.Body: It is the driving device, which includes motor, planet reducing box, driving gear and guide wheel.
2.Hand knob：It is used to move this machine. Please hold it fully.
3.Electric cabinet：To control the movement of carriage. Please refer to control panel manual.
4. Cross device: You can use it in the process of straight welding (such as container case) to adjust the position of torch in case of moving rail.
5. Straight rail: It is equipped with permanent magnet to make the rail absorb to works to meet different welding needs.
6. Magnet: Strong on-off magnet. If you want to move the rail, please turn all magnetron switches “OFF”.
7. X-Y trimming slide blocks: It is convenient to adjust the blowtorch up and down or left and right.
8. Holder of blowtorch: It can hold the blowtorch and adjust the angle of blowtorch easily.
Notice: Must not hold the conductive section, which may lead to short out or electric shock.
9. Plug seat of source: It is the plug seat of external electric cable, which is connected with earth wire.
10. Hand knob: It is convenient to make carriage move freely on the rail.
11. Thermal baffle: To prevent carriage from being damaged by source of heat.
Main parameters
Weight | 6.25Kg |
Driving mode | Gear, gear rack driving |
Draft load | 16 Kg |
Speed | 50~~800 (mm/min) |
Tracking mode | Rail |
Adjusting range of torch | Horizontal angle：40°～55° Move up and down：45 mm Move fore and after：45 mm |
Torch | Bending torch or straight torch |
Locking device of torch | Suitable for bending or straight torch |
Outline dimension | 350mmx240mmx250mm |
Welding technical parameters
welding wire diameter welding parameter | Φ1.2mm | Φ1.4mm | Φ1.6mm | |
current（A） | Down hand welding | 120-300 | 150-380 | 180-430 |
flush fillet welding | 120-280 | 150-320 | 180-380 | |
horizontal welding | 120-280 | 150-300 | 180-330 | |
voltage（U） |
| |||
distance between nozzle and workpiece（H） |
| |||
welding extension length（L） | The length is about 10 times welding wire diameter. It is L=10d | |||
Contents of package
1. | Body | 1set |
2. | Control wire | 1pc |
3. | Magnetron rail | 1pc（1.8m） |
4. | Fuse | 1set |
5. | hex wrench（M4/M5/M6） | 1set each |
6. | Operating manual , Certificate of qualification | 1pc each |
- User name Member Level Quantity Specification Purchase Date
- Satisfaction ：
-
