CG2-1600 Circular oxygen cutting machine

 Contents of package

Carefully take the machine out of its case.The contents of the standard package are shown below. Check them carefully before assembling the machine.

1.Body …………………………………..1set

2. Tip ……………………………………3pcs

3. Power wire……………………………1pc

4. Specification sheets…………………..1pc

5. Certificate of qualification…………...1pc

1. Base: It contains two square steels as feet. In addition to stabilizing the body, the five

rollers installed at the bottom make it convenient to move the machine.

2．Upright square steel

3．Main cantilever：The cantilever stretches forward bearing all the impending part of the

   weight.

4．Control panel: Some functions such as start/stop、work direction and speed are controlled

   by it.

5．Sidesway device：When wanting to cut a larger circle, using this device can stretch

   outwards.

6．Motor and reduction gearbox：They are the core parts of the machine drive.

7．Gas rotating distributor：This distributor has reasonably solved the problem about the

   mechanical rotating and the distribution of gas path, avoiding the winding of gas path

   hose on the rotating machine.

8．Torch balance adjusting device:Place the machine on the steel plate stably, adjust the foot

   screw and shift the transmission into the neutral position, then make the torch a whirl. If

   the inconformityoccurred betweena certain point of torch andthe cutting positionof steel

   plate, you can regulate this device so as to solve it effectively.

9．Radius rod regulatorbase：Through this device you can regulate the position and the height

   of torch.

10．Centering base：This device is used for positioning the center of circle, ensuring the

    roundness of the cutting.

11．Torch: Here you can fine adjust the height from the steel plate and the cutting groove

    angle.