Special model for Nonferrous Metals

In high-power induction heating equipment, the application of voltage-type series resonance topology, usually in the non-ferrous metal heat treatment industrial production, requires conversion of the start-stop working state operation, and the alternate deformation structure is better suited for this; The problem of higher Q value, which brings higher working voltage of power devices, is prone to problems such as capacitor breakdown, transformer saturation, and winding turn-to-turn discharge. The voltage type is connected in series
with DSP+FPGAfully digitally controlled non-ferrous metal heating. Induction heating equipment is recommended.
Effectively reduce the voltage amplitude of the series resonant network voltage source several times or even ten times, greatly improving the stability of the equipment and the safety of operation.
Therefore, a large number of power supplies for nonferrous metal induction heating are suitable for replacing voltage type series DSP+FPGA full digital control of nonferrous metal heating. Induction heating equipment is recommended. Work in this field will bring obvious advantages.

一、EQUIPMENT FEATURES：

It is mainly aims to change the surface hardness of the metal materials through the heat treatment to work-pieces. Detail applications are stated as follows:  
1) Quench for various hardware and tools, such as pliers, wrench, hammer, ax, screwing tools and shear (orchard shear). 
 2) Quench for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.
3) Various electric tools, such as gear and axes. 
4) Quench for machine tools, such as lathe deck and guide rail. 
5) Quench for various hardware metal parts and machined parts, such as shaft, gear (chain wheel), cam, chuck and clamp etc. 
6) Quench for hardware molds, such as small-size mold, mold accessory and inner hole of mold. 
7) Improve performance and save space
8) Controllable and positioning heating
9) Can handle specific parts of the work-piece (quenching profile)
10）High frequency hardening deep on about 1MM.

二、EQUIPMENT PARAMETERS：